Aluminium systems

A glazed façade, not limited by form, opens up new horizons of design. Due to its lightness and plasticity, aluminium offers broad design possibilities, making it possible to create very large glazings, and consequently, spacious interiors filled with natural light.

Aluminium façade variants

WIŚNIOWSKI façade systems allow you to design all-glass building façades. We offer solutions for non-standard shapes of light curtain walls, multi-surface walls, roofs, skylights, and other dimensional structures. Various versions of glazing with safety glass in all the available types provide unlimited arrangement possibilities, while meeting all the required safety standards.

MB-SR50

– mullions and transoms enable construction of appealing façades where only narrow division lines can be seen, looking like a uniform lattice;
– the system enables erection of light flat curtain walls of the suspended or filling type, as well as roofs, skylights, and other structures;
– a wide range of openable elements;
– a wide range of glazing units, as well as isolators and accessories;
– thanks to special covering profiles, as well as properly shaped clamping strips and garnish strips, the walls can be stepped in the horizontal and vertical cross-section;

MB-SR50 PL

– MB-SR50 PL mullion and transom façade, where thanks to proper garnish strips (e.g. elliptical ones), only one direction of façade division is highlighted;
– angular connections provide freedom in the design of spatial structures;
– enables erection of light curtain walls of the suspended or filling type, as well as roofs, skylights, and other spatial structures;
– protecting the structure against heat energy loss;
– wide range of glazings and high load-bearing capacity of the mullion and transom connection;
– broad array of openable elements, windows integrated with the façade, as well as tilt-only (hopper) and parallel opening windows, without changing the look of the façade;

MB-SR50 A

– MB-SR50A mullion and transom façade with an insert system;
– makes it possible to combine construction materials with various properties, different inside and outside the room;
– covering profiles with various shapes providing a large number of possible façade design options;
– used in vertical structures, glass roofs, and sunrooms;
– angular joints enable freedom in the formation of aluminium structures;
– a wide range of openable elements;
– a wide range of glazing units, as well as isolators and accessories;

MB-SG50

– MB-SG50 structural façade;
– aesthetic and light structure that looks like an all-glass surface;
– glass mounted to aluminium modules with special structural silicone;
– side mounting of aluminium frames enables installation of opaque panels on a solid wall;
– for the erection of light curtain walls of the suspended or filling type, as well as roofs and skylights;
– tilt-only (hopper) windows do not change the look of the façade;
– the façade is easy to keep clean;
– wide range of glazings and high load-bearing capacity of the mullion and transom connection;
– the option of forming sections and constructing arch structures available;

MB-SR50 EFEKT

– MB-SR50 EFEKT semi-structural façade;
– specially processed glass panes can be mounted using mechanical fasteners;
– uniform glass surface effect from the outside;
– for the erection of light curtain walls of the suspended or filling type;
– thermal break made of insulating HPVC material;
– shaped EPDM window gaskets;
– angular connections available;

MB-SR50 EI

– MB-SR50EI fire-rated mullion and transom façade;
– for the erection of fire-rated light curtains and filling walls with the EI15, EI30, EI45, and EI60 fire rating;
– various garnish strips available;
– angular connections up to ± 7.5° per side and façade structure deviating from the horizontal by up to ± 15° available;
– MB-78EI system doors can be installed in mullion and transom façades while maintaining the EI30 or EI60 fire rating of the entire structure;

Aluminium window variants

WIŚNIOWSKI’s opening and fixed windows can be used in all types of buildings. The multitude of variants enables a very individual approach to the design of the building façade. The technological parameters of the materials we use enable the production of even the most non-standard window shapes manufactured based on profile systems with and without a thermal break.

FUTURO MB104 Passive AERO

Aluminium windows made of 95 mm deep (frame) and 104 mm deep (window leaf) three-chamber sections with a thermal break;
The window with a central chamber infilled with a special insulating core provides the highest thermal insulation performance;
Opening methods: turn-only (side-hung), tilt-only (hopper), tilt and turn;
Infill: two-chamber glazing unit or a panel made of galvanized steel sheets, with 40 mm thermal insulation;

FUTURO MB104 Passive SI

Aluminium windows made of 95 mm deep (frame) and 104 mm deep (window leaf) three-chamber sections with a thermal break;
The window with a central chamber inside composite sections, infilled with the EPS insulating core between thermal brakes, provides very high thermal insulation performance;
Opening methods: turn-only (side-hung), tilt-only (hopper), tilt and turn;
Infill: two-chamber glazing unit or a panel made of galvanized steel sheets, with 40 mm thermal insulation;

FUTURO MB86AERO

Aluminium windows made of 77 mm deep (frame) and 86 mm deep (window leaf) three-chamber sections with a thermal break;
Opening methods: turn-only (side-hung), tilt-only (hopper), tilt and turn;
Infill: two-chamber glazing unit or a panel made of galvanized steel sheets, with 40 mm thermal insulation;
Glazing units 21 mm to 67.5 mm thick can be used in openable window leafs, and those 13.5 mm to 58.5 mm thick in fixed window leafs.

FUTURO MB86SI

FUTURO MB86ST

FUTURO MB70HI

Aluminium windows made ofi 70 mm deep (frame) and 79 mm deep (window leaf) three-chamber sections with a thermal break;
Opening methods: turn-only (side-hung), tilt-only (hopper), tilt and turn;
Infill: two-chamber glazing unit or a panel made of galvanized steel sheets, with 40 mm thermal insulation;
Glazing units 21 mm to 60 mm thick can be used in openable window leafs, and those 12 mm to 51 mm thick in fixed window leafs.

FUTURO MB70

Aluminium windows made of 70 mm deep (frame) and 79 mm deep (window leaf) three-chamber sections with a thermal break;
Opening methods: turn-only (side-hung), tilt-only (hopper), tilt and turn;
Infill: two-chamber glazing unit or a panel made of galvanized steel sheets, with 40 mm thermal insulation;
Glazing units 21 mm to 60 mm thick can be used in openable window leafs, and those 12 mm to 51 mm thick in fixed window leafs.

FUTURO MB60

Aluminium windows made of 60 mm deep (frame) and 68 mm deep (window leaf) three-chamber sections with a thermal break;
Opening methods: turn-only (side-hung), tilt-only (hopper), tilt and turn;
Infill: two-chamber glazing unit or a panel made of galvanized steel sheets, with 30 mm thermal insulation;
Glazing units 14 mm to 50 mm thick can be used in openable window leafs, and those 5 mm to 50 mm thick in fixed window leafs.

FUTURO MB45

– made with the use of the ALUPROF MB-45 aluminium profile system without a thermal break;
– fixed window infill: single glass pane, glazing unit or panel made of galvanized steel sheet with thermal insulation;- – frame and leaf powder-coated in any RAL, RAL mat structure or DECOR palette colour or film-coated;

Façade structures

Additional solutions

Smoke flaps are an important element of the ventilation system, which will help eliminate smoke and toxic fumes dangerous for people’s health and life from the building, if needed. A vast array of solutions enables installation separately or as elements integrated in the aluminium façades or roof glazing.

A glazed façade with southern exposure? Apart from fitting the façades with safe, UV radiation resistant glazing units, we offer installation of adjustable façade shutters in a vertical or horizontal version. It is a solution increasing the comfort of use of the building regardless of the season – providing pleasant coolness in the summer and keeping the heat inside in the winter.

Skylights and sidelights

– ensure natural lighting;
– different functional variants: increasing interior lighting; increasing interior lighting and ventilation; increasing interior lighting, ventilation, and smoke venting;
– available for all types of façade systems;
– angular joints enable free forming of spatial structures;
– a wide range of glazing solutions, as well as isolators and accessories makes it possible to obtain a high degree of thermal insulation;
– set of gaskets and a drainage and venting system;

Smoke flaps

– a wide range of solutions – can be based on window systems, as well as on window structures dedicated for façades,
– various window opening methods – turn-only (side-hung) windows or tilt-only (hopper) windows with inward or outward opening, roof windows used in inclined façades or roof skylights;
– reliable and quiet mechanisms;
– various drive units compatible, integration with power supply, control, and protection systems,
– integration with the building’s HVAC system available;

Façade shutters

– lowered consumption of heat energy from traditional sources;
– thermal comfort ensured inside the building;
– aluminium sections 100 to 300 mm wide;
– shutter inclination angle adjustable from 0° to 45°;
– installation options: vertical and horizontal;
– can be installed to the façade, load-bearing wall or windows;
– louvres are fixed with special side caps to ensure optimal adjustment;

Lift and slide system

MB 77 HS ST

Add our convenient and functional patio doors to your WIŚNIOWSKI windows and façades! The MB 77 HS ST aluminium system connects interiors and sunrooms with the home’s surroundings. It constitutes a comfortable exit to the balcony, patio or an open garden area. Thanks to the outstanding lift and slide system, it does not take much space in the open position.

The system structure makes it possible to create exclusive, large-size doors. The materials and technical solutions used guarantee high thermal and sound insulation parameters.

For Industry