PI cantilever sliding gates

Manually-operated gate

Gate with a drive unit in a low box

Gate with a drive unit in a high box

Manually-operated gate

Gate with a drive unit in a low box

Gate with a drive unit in a high box

Manually-operated gate

Power-operated gate

Lock for the manually operated gate

is a reliable and durable lock for locking manually operated gates, placed in an aluminium housing.

Drive unit in the post

is protected against mechanical damage, negative effect of the weather conditions, and access of unauthorised persons.

Safe control of the gate

with a key switch slot equipped with a safety switch – turning the key starts the gate opening or closing process, pushing the safety switch immediately stops the movement of the gate.

Safety edge

stops the gate and returns it to the open position when it encounters an obstacle. Mounted on the face edge of the leaf, guiding frame or at the end of the gate.

Warning light

informs about the movement of the leaf every time the gate is started.

Photocells

mounted on the gate posts – if an obstacle appears in the clear passage, the infrared beam is interrupted and the leaf stops and returns to the open position.

Induction system

sends an impulse triggered by pressure exerted on the safety edge from the gate leaf to the controller.

Adjustment element

makes it possible to additionally level the leaf relative to the ground during gate installation and to correct its position throughout its service life.

Security spikes

in the form of a steel razor comb can be mounted on the top edge of the gate leaf